The products are being added to the cart. Please wait
The Configuration is no longer valid. Product is not added to cart.
Driven unit handling conveying and particularly driven conveyor systems, transport of medium-heavy to heavy materials, e.g. cardboards, containers, barrels, pallets or rims. Suitable for implementing gravity or gravity roller conveyors.
Also usable for mechanical engineering applications. The version with steel tube and dimension 60 x 3 mm can also be used as belt idler.
This roller series has been proven millions of times. The roller offers a very high degree of functional dependability.
The use of precision ball bearings, Technopolymer bearing housings and seals result in very quiet running.
The tube ends are rounded, thereby allowing materials to be easily moved on from the side. Axial forces are removed through ball bearings and seals.
To obtain an axial fixing of bearing housing, ball bearing and seal against escaping, the bearing housing is not only pressed into the tube, but also flanged.
Steel Conveyor Wheel Series 2200
This series is universally applicable, can be used in freezer areas and as side guide wheel.
The steel conveyor wheel excels with its high load capacity, robustness at high and low temperatures as well as good running stability. Hardened ball running surfaces ensure a long service life.
RollerDrive EC310
Drive for unit handling conveyor systems, such as transporting cardboards, containers, barrels, workpiece carriers or tires. Suitable for sectional conveyors, roller curves, small belt conveyors and especially zero-pressure accumulation roller conveyors. The motor integrated in the tube allows a very compact design of the conveyor system.
The brushless motor features an energy recovery in braking.
The drive can be used in straight sections and curves and ensures a constant conveying speed. Depending on the application area, PolyVee, round or toothed belts can be used for the transmission of force. Overall, nine gear stages are available. The electronic holding brake (Zero Motion Hold) holds materials in position, even on gravity conveyors, so that the RollerDrive can also be used as a drive in these applications.
The use of decoupling elements achieves particularly low-noise running.
The brushless motor with internal commutation electronics does not require any maintenance. It features an overload protection that prevents damages due to overtemperature or blockage. It is connected securely without complex screw connection by using a motor cable with 5-pin snap-in plug.
Fixed Drive Conveyor Roller Series 3500
Driven unit handling conveying, such as transport of cardboards, containers, barrels or tires.
The use of polyamide drive heads results in very quiet running.
The tube ends are rounded, thereby allowing materials to be easily moved on from the side. Axial forces are removed through ball bearings and seals.
An axial fixation of the bearing assembly (bearing housing, ball bearing, seal) on the non-drive side can be accomplished in several ways. For the design with steel tube, the bearing assembly is pressed into the tube and then flanged. For the design with PVC tube, it is fitted with a groove inside the tube in which the press-in edge of the bearing housing engages. For the designs with PolyVee and round belt, the drive bearing assembly is also pressed into the tube and then flanged.
With a permanently installed bearing housing for a tube diameter of 50 and 60 mm, insertable polyamide drive heads, such as sprocket, toothed belt and flat belt heads, are interchangeable and can also be exchanged with friction heads. Numerous drive versions are available with flat, PolyVee, round or toothed belts as well as chains.